Bathroom mirror installation requires attention to anti-fog and anti-fog bathroom mirrors. Generally, chemical anti-fog agent coatings are used, and the effect is time-limited. Mirror anti-fogging is the same as car glass defogging, which requires wind blowing. The real anti-fogging mirror has a heating device behind it, so that the mirror has heat to evaporate the water vapor. If it is an ordinary mirror, use a harder soap dipped in water to wipe the surface of the mirror, and then wipe it with a dry rag to form a protective film, which can also play a temporary anti-fog effect.

bathroom mirror

If you want to look beautiful, you must have good lighting, and the lights on the front of the mirror or the side of the mirror are very necessary.

When installing, you can use expansion bolts. When drilling, pay attention to the variety of tiles. If it is all-ceramic, use rhinestones and hit them little by little. Otherwise, it is very easy to crack. If you use glass glue to fix, do not use acid glass glue, you should choose neutral glue, acid glass glue will usually react with the material on the back of the mirror, causing mottled mirror surface. Before applying the glue, it is recommended to do a compatibility test to see if the glue is compatible with the material. It is better to use a special mirror glue.

In the bathroom, you usually stand and look in the mirror. The bottom edge of the bathroom mirror should be at least 135 cm from the ground. If the height difference between family members is relatively large, you can adjust it up and down. Try to make your face in the middle of the mirror, so the imaging effect is better. It is recommended to choose the frameless style, because the bathroom is often in a wet state, and the frame materials such as wood and leather are easy to change over time.

Bathroom mirror manufacturer Kaiping Xinmingguang Hardware Products Co., Ltd. is a professional factory with the ability to independently develop, design and manufacture bathroom mirrors, floor drains, hardware manufacturing and vacuum electroplating processes. Management philosophy, with a strong technical team, engaged in product, tooling and mold design and engineering technology for hardware manufacturing and electroplating process research and development, master Pro/E 3D auxiliary design and auxiliary manufacturing technology, configure multiple fully automatic control electroplating production lines, and apply nano electroplating And other technologies are at an important domestic level, welcome to consult and understand.

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)